NOSE CONES vs. SHIPPING and TIME
All of the nose cones for large and smaller traps are made to fit over or around the traps they accommodate, in the 9×11 sized traps of any length, 18, 24, 30 and 36 inch lengths and also in the 5x5x24 and 6x6x24 squirrel traps. Because the nose cones fit snugly around the traps they work with, they add very little to shipping. When placing an order it saves a great deal to order traps with nose cones to ship together. For, transport and use, these nose cones take up only a small amount of space and do not add a lot of weight for shipping.
Nose cones can save a lot of time in fabricating individual wire units to go over dens and entry points. The squirrel nose cone will accommodate holes in soffits from above, holes in walls, corner holes or holes from below, in the ground on in a building. Since the nose cone can be fastened to a building over a hole in a wall to point in left or right in either direction, the cage trap can be attached to the flat wall length wise more out of site and stabile, rather than protruding from buildings at 90 degrees like other devices that may extend 2 feet straight out from the surface.
